Produktuen Sarrera
Water-based white primer, water-resistant and alkali-resistant, has strong universal performance, has hiding power, and can avoid alkali return and hair flowers in the topcoat.
Produktuen Ezaugarriak
White primer, strong universal performance, can improve the topcoat coating rate
Good sealing, anti-saline and alkali precipitation; avoid the topcoat returning to alkali and blooming
Low water permeability, good water resistance, prevent rainwater from penetrating into the base layer
Good adhesion, high bonding strength, not easy to bulge, peel off, etc
It is green and environmentally friendly, the construction is easier, and the viscosity is diluted with water
Neurriak
Oinarrizko eskakizunak: The grass-roots should be firm, flat, clean, no floating ash, no empty drums, and open cracking, water seepage, etc., require a moisture content of <10%, a PH value of <10, etc.
Klima-eskakizunak: Avoid construction under harsh climatic conditions such as frost, freezing, rain, snow, etc., the base layer temperature is required to be 5-35℃ and the air humidity is <85%.
Erabilera erlazioa: Use the alkali-resistant white primer for the exterior wall after stirring well, if you need to adjust the viscosity the consistency should be diluted in a fixed proportion by someone, pay attention to the proportion of water added should not exceed 10% of the amount of paint used.
Estalduraren argibideak: Ihinztagailu bat erabil dezakezu ihinztatzeko, artilezko arrabola erabiltzea gomendatzen da estaldura biribilkatzeko, artilezko eskuilak erabiltzen dira izkinak eta arraildurak eraikitzen laguntzeko.
Tresnen garbiketa: During the construction gap, rollers, brushes, spray guns, mixers, etc. are used work tools should be cleaned with water in time and dried for backup.
Biltegiratzeko gaiak: Uretan oinarritutako estaldurak salgai ez-arriskutsu gisa garraiatzen dira eta leku fresko eta aireztatu batean gordetzen dira, 5-35 ℃-ko tenperaturan, pilatze-geruza bi geruzakoa da eta zigilatutako biltegiratze-epea urtebetekoa da.
Performance parametroak
Produktuen zehaztapenak: 25kg/upel
Osagai nagusiak: Emulsion, filler, additives, etc.
Lehortzeko denbora. Gainazaleko lehortasuna ≤2h (23 ± 2 ℃, hezetasuna ≤50 ± 5%)
Ura erresistentzia: 96 orduko estaldura anomaliarik gabe
Alkali erresistentzia: Ez dago anomaliarik 48 orduko estalduran
Uraren iragazkortasuna: ≤0.3 ml
Alkalinitate antipantotenikoa: 120 ordu anomaliarik gabe

EN
AR
BG
HR
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RO
RU
ES
SV
IW
ID
LV
LT
SR
SK
SL
UK
VI
ET
HU
TH
TR
FA
MS
BE
HY
AZ
KA
MN
MY
KK
TG
UZ
KY






